What Hockey Pucks Are Made of & Who Makes Them?

hockey puck

Hockey pucks are small black disc that slides across the ice, but it’s not just for skating. The average NHL game goes through 12 pucks so you might be surprised by how much information there actually was concerning this sport before taking them lightly.

Regulation sized puck

The hockey puck is a precious and expensive commodity. It’s three inches in diameter (75 mm), an inch thick with 5-6 ounces of weight that vary by the manufacturer because different materials are used for their crafted surfaces; but what makes this object so special? The side comes equipped not only having dozens of small grooves embedded into them like grip patterns on your stick when shooting or handling one down low – these were designed specifically so players could get more purchase while taking aim at goal.

Ice hockey pucks come in all different shapes and sizes. They’re often used for kids’ games, though they can also be found on the ice with professional players. These unofficial ball-shaped objects have markings that identify them as belonging either to an adult league or just play around town; there is no set standard among these types of the puck because it varies from rink-to how much weight needs carrying off before goal-scoring becomes difficult enough without adding another factor such as size into consideration.

Puck history

In the late 1800s, people used many different things to play hockey with. For example, they put frozen cow dung on poles so that it would snow and create ice which could be warmed up in order for them to have a better game! Rubber balls were also commonplace back then but since 1875 when someone cut off their edges so they wouldn’t bounce anymore – we’ve had this thing called “puck.”

hockey puck

The design of the hockey puck has changed over time. In fact, it was not until 1930 that beveled edges were introduced to pucks and they served as a means for players’ hands to grip onto during games without slipping off easily due to its smooth surface area along with other features such as grooves cut into each side which allow skaters use their stick-like grease sticks when passing or shooting. The modern-day NHL-approved official league-branded game ball came into existence after 1990 when it became mandatory within championships under new rules limiting goalkeepers’ glove size at two inches thick plus ten extra-wide spaces around palm area.

The NHL has long been known for its innovative thinking, which is why it’s no surprise that they came up with the pucks idea. These little puck-shaped batteries would be used in place of standard ice hockey balls during games and could last approximately 10 minutes before dying off; each one cost $400! The league then stopped using them following the 1998/99 campaign because these were designed specifically for TV networks.

How regulation pucks are made

For years, hockey players have used regulation pucks manufactured by hand to mix granular rubber with a bonding material and antioxidants. Now you can enjoy these same “hockey puck” qualities in your own backyard.

The process starts when coal dust is mixed together at room temperature until it becomes like sand; then this fine powder will bond securely through its chemical properties onto both sides of plastic or polyurethane foam which makes up most types/brands found in today’s market boards (defined as those less than 2 inches thick). The two-part mold that forms each individual piece contains enough pressure from inward poking & shaping along with external compression during production.

hockey puck

Then starts with the rubber being shaped into logs that are three inches wide and then cut up. The pieces will be placed in molds that have been made for them, so they can harden all at once before being compressed together as a puck! Afterward, logos may either get silkscreened onto these pucks using special ink made from natural resources like tree sap or even gold if desired.

The pucks are all inspected to make sure they adhere to the proper size and weight regulations and to check for any soft rubber or air bubbles. Any pucks that fail the test are recycled for reuse. The pucks are further tested for bouncing by freezing them for approximately 10 days.

Puck manufacturers

The most well-known puck manufacturers across the world are North American sporting goods companies such as InGlasCo, Sher-Wood Viceroy Spalding. The NHL’s official pucks are currently supplied by a Quebec company called IG controlled which has been making them for over 100 years.

Manufacturers of various puck sizes and weights provide a variety for players who want to improve their shots. For example, two-pound steel pucks can be used as weight training equipment only while blue four-ounce pucks are made specifically with children in mind or even ten-ounce discs if you’re an experienced player looking to develop your game.

Do They Freeze Pucks?

The elite-level leagues use a special device to reduce the bounce of pucks. This makes it more stable as they move across the ice with speed, and also helps players keep their balance easier when shooting or stickhandling in these types of games.

Will Pucks Change?

The National Hockey League began adding sensors in its pucks this year, and it has been a game-changer for tracking plays on the ice. The new technology combines with cameras that are placed high above the rink to capture movement patterns of both players AND equipment! This information can then be analyzed by teams who want nothing more than victory over their rivals – even if perfection isn’t always possible. Though professional hockey leagues have been known in recent years to change the way they make their pucks, it is unlikely that any changes will occur when determining what type of material should be used for regulation-sized games.

Scroll to Top